Serial port settings

In the “Serial” section the software provides the programming parameters of the serial ports the board is equipped with:

  • 2 RS485 serial ports

  • 2 RS232 serial ports

Serial ports

For each serial port it is possible to select the type of operation:

  • unused port

  • interface with “ESPA 4.4.4” protocol

  • interface with “Web Way” protocol

  • connection with Smart485IN board

  • interface with “Paso” protocol

ESPA444 settings

“ESPA 4.4.4” is a standard protocol for the interconnection of paging systems, PABXs and automatic fire-detection systems. This protocol allows the exchange/sending of text messages between mobile devices such as pagers, cordless telephones, etc.

In this section the communication parameters of the protocol are available.

Smart485IN

In this section you can select the terminals of the Smart485IN module, interface board for standard keypads:

  • the output groups activated by the inputs of the Smart485IN module

  • the output groups that the Smart485IN module outputs must belong to

Events on printer

Option that allows the transfer of the events log via serial port for printers.