EITK2000

The EIKT2000 kit also takes advantage the Versa++ technology, thanks to which it is possible to manage IRIS series conventional fire detectors and configure each one in accordance with the specific conditions of the environment in which it is to be installed. With EITK2000 it is possible to connect to a line of detectors and, for each of them, carry out a complete diagnosis to test its functionality, verify the value read in real time, read the contamination value of the optical chamber, change its sensitivity and operating mode.
The kit also allows you to read the non-volatile memory, present in every detector (both Iris and Enea series), which contains a graph with the smoke and temperature concentrations measured in the period before the last alarm detected (a function aimed at assisting investigation into the causes that triggered the alarm).
The device also allows the implementation of accurate diagnoses that identify where the cable is interrupted or shorted and the carrying out of tests on the loop (walk tests) which monitor the number of communication errors, record the date and time of activation of each detector and, on completion of the operations, provide a printable professional report.
The EDRV2000 driver contained in the EITK2000 kit is capable of operating autonomously by way of its internal batteries, keypad and display. However, when the driver is connected to a PC it will be powered and will charge its batteries through the USB port.
The EITK2000 kit constitutes professional apparatus that the toolbox of every competent fire professional cannot be without.
The kit comes in a handy case complete with 24Vdc power supply, cable and software CD.

ENEA series detectors, as a result of advanced technologies based on new-generation microprocessors, represent the most advanced technology that fire detection equipment can offer today.

They provide a vast spectrum of options and flexible functions, all configurable from the control panel (Versa++ technology). ENEA series detectors are capable of implementing a sophisticated set of algorithms, custom created by Inim’s R&D professionals, which ensure unequalled reliability and the highest immunity to false alarms.

Thanks to INIM’s leading-edge LoopMap technology, you can now connect to the control panel by means of a computer or EDRV1000 driver and reconstruct the exact installation topology and obtain an easy-to-use, interactive loop layout map which greatly simplifies and speeds up searches relating to faults and maintenance work.

These detectors have passed - with flying colours - all the tests taken at the LPCB test facility, the prestigious English certification service. And, thus hold the right to use this mark in addition to the obligatory CPD certification for the commercialization of fire detectors.