WSB1000 - Alarm signalling devices on detector’s bases

Alarm signalling devices for wireless detectors (model detectors WD100, WD200, WD300), thakes their own address to be managed independently from the detector to which they are combined. 32 different tones selectable by dip switches, can be activated with two different tones (prealarm and alarm activation). In the models with optical signaling, the power of the flasher can be adjusted via DIP SWITCH and models with white light or red light flash are available. The WSB1000 devices can be used as a stand alone ceiling mounted lantern (without detector) using the optional white or red cap.


Specifications

  • 32 different tones settable by DISP SWITCH
  • Can be activated with two different tones (pre-alarm and alarm)
  • Sound power adjustable by DIP SWITCH (4 levels)
  • Adjustable flash power
  • Two-way radio communication
  • Radio communication based on two redundant channels
  • Extended radio communication range (up to 200m)
  • Battery life 5 years (estimated duration, may vary according to activation frequency)
  • Uses low cost standard lithium batteries
  • EN54-25, EN54-23 and EN54-3 certified
  • Can be used as a stand alone ceiling mounted lantern using the optional white or red cap

Technical specifications

  • Operating Frequency: 868 – 870 MHz
  • Maximum radiated power: 14dBm (25mW)
  • Acustic power: from 88dB to 91dB (according to selected tome)
  • Optical coverage (EN54-23) with hi power flash set: C-3-15/ O-4.6-15
  • Optical coverage (EN54-23) with low power flash set :C-3-10
  • Dimensions: Diameter 129mm h:54mm
  • Weight (without batteries):  221 g
  • Batteries : 2x CR123A 
  • Operating temperature:  -10°C to +55°C
  • MAX Humidity: (non condensing) 90% RH
  • IP Rating: IP21C

Related products

WS2000 - Wall mounting alarm signalling devices