SmartLinkAdv/P

Voice and digital dialler on PSTN

SmartLink Advanced Telephone dialer on PSTN line, GSM / GPRS network and generator of a backup telephone line

The SmartLink Advanced anticipates the needs and technologies of ‘the-day-after-tomorrow’ security and PSTN and GSM network connectivity requirements. The SmartLink Advanced offers best-inclass PSTN and GSM network connectivity and thus allows installers to deliver the highest levels of user satisfaction. The device is capable of generating a reserve telephone line when the PSTN is unavailable, as well as operating as a GSM voice dialler with 100 pre-recorded messages customizable by means of text-to-speech software or .wav file.

In fact, the new hardware (for P and GP versions) integrates a powerful voice board capable of storing 15 minutes of speech and 100 messages. Moreover, the SmartLink Advanced is capable of sending SMS messages over the GSM network, in both manual and automatic mode. Automatically generated texts can be modified through the software editor

The SmartLink dialler was certainly a revolutionary communication tool. It offered high-security performance to the end user and ease-of-installation, flexibility and long-term reliability to the installer. The SmartLink Advanced platform delivers extensive capabilities which go well beyond those common to this historical segment of security communications.

The SmartLink Advanced anticipates the needs and technologies of ‘the-day-after-tomorrow’ security and PSTN and GSM network connectivity requirements. The SmartLink Advanced offers best-inclass PSTN and GSM network connectivity and thus allows installers to deliver the highest levels of user satisfaction.

The device is capable of generating a reserve telephone line when the PSTN is unavailable, as well as operating as a GSM voice dialler with 100 pre-recorded messages customizable by means of text-to-speech software or .wav file. In fact, the new hardware (for P and GP versions) integrates a powerful voice board capable of storing 15 minutes of speech and 100 messages. Moreover, the SmartLink Advanced is capable of sending SMS messages over the GSM network, in both manual and automatic mode. Automatically generated texts can be modified through the software editor.

The SmartLink Advanced also operates as a dual-net digital GSM and PSTN dialler and can transmit information to alarm receiving centres via the most widely used protocols, such as Contact-ID (PSTN) or standard SIA-IP (GPRS). The SmartLink Advanced provides a call-answering feature with voice guide (similar to that on SmartLiving intrusion control panels). This feature allows users to control the system over-thephone (up to 200 telephone numbers can be enabled on the white-list) and provides all the functions related to the activation of scenarios, home-automation and intrusion control via SMS, with the added assurance of command feedback (ring or SMS message).

The new generation technologies integrated in the SmartLink Advanced allow you to select the best provider even before purchasing the SIM card (EasyScan function). These technologies also allow you to be sure that your system is protected against intentional or unintentional jamming which can disrupt wireless transmission and inhibit the GSM signal. Thanks to the up-to-the-minute technology of the new GSM module, the SmartLink Advanced takes full advantage of Roaming services through a single SIM card. This allows the end-user to avoid purchasing other SIM cards for the device and guarantees the best possible connection at all times.

It is also possible to establish a connection between two SmartLink Advanced devices for the periodic control and management of the “GSM Network Connection” check. Another useful aspect of the SmartLink Advanced is that it is capable of managing the GPRS channel for its own remote management and programming. This feature allows users to access the device through the Internet. To activate the GPRS channel of the GSM network, just insert an Internet enabled SIM. The installer can activate the GPRS connection by sending an SMS message containing valid credentials. The SmartLink Advanced will connect to the previously programmed IP address of the device.

If the installer is on the move and the connection IP address is different from the programmed one, it is possible to send the device an SMS message containing valid credentials and the IP address the SmartLink Advanced must connect to. By means of new programming and control software, it is now possible to obtain remote access to all the device functions in a simple, fast and secure way.

Hardware features

model P

model G

model GP

Reserve line generator

Input/Output terminals (Patent pending)

5

5

5

Input terminals programmable as NO, NC, single and double termination

Output terminals programmable as NO, NC, bistable and pulse

Programmable via USB

15 minute integrated voice card

Auxiliary current output (400mA fuse protected)

Open-panel tamper protection and connection terminals for external device

Metal enclosure

External power supply

Battery supervision (level, efficiency, connection)

Deep discharge shutdown

Battery housing

12V 1.2Ah

12V 1.2Ah

12V 1.2Ah

Power

13,8Vdc - 650mA

13,8Vdc - 650mA

13,8Vdc - 650mA

Dimensions (HxWxD)

220x133x55 mm

220x133x55 mm

220x133x55 mm

Weight (Kg)

0,9

0,9

0,9


Operating features

Intrusion control function

500 event memory (non-volatile)

GSM/GPRS voice and digital dialler

PSTN voice and digital dialler

SMS dialler on GSM network

Manages DTMF commands over GSM network with or without code entry

Manages DTMF commands over PSTN with or without code entry

GSM or PSTN line priority selection

Fault signalling (battery, PSTN linedown, output trouble)

Capable of diverting incoming SMS messages

Actuator with Caller ID recognition

Manages SMS commands after recognition of Code or Caller ID

SMS command-received feedback (ring or SMS message)

Telephone numbers for dialler functions (voice and digital)

15

15

15

Pre-defined SMS messages for event signalling (customizable)

100

100

Sends dialler calls for each event over PSTN or GSM network

On-card voice messages (up to 15 minutes) recordable by means of text-to-speech software or .wav file

100

100

Programmable periodic events

3

3

3

Manages remote programming/monitoring over GPRS

Manages supervision over GPRS

Manages SIA-IP and transmits information to alarm receiving centres via the most widely used protocols

Answerphone function with voice menu

Manages and signals Roaming status

Easyscan function for best provider selection

Jamming detector

Supervises periodic check between 2 SmartLink Advanced devices

Manages 200 action-associated numbers (white list) with Caller ID or SMS message recognition

Automatic SIM card credit enquiry with programmable threshold

Related products

SmartLink/REM-ANT