Air2-MC200/S

Wireless magnetic-contact for alarm systems

The Air2-MC200/S magnetic contact for wireless intrusion-control alarm systems integrates a reliable high-precision shock and a tilt sensor that provides extensive programming flexibility.

It is possible to carry out accurate programming in order to adapt the device functions to the specific needs of the individual installation. The tilt sensor allows detection of the opening of overhead and awning windows thus avoiding the use of the magnet.

The Air2-MC200/S is protected against tamper attempts and forced removal. The device uses separate channels for the different types of signalling, thus allowing precise identification of the alarm source.

Frequently security professionals perceive the market need for a reliable, truly proficient wireless system. And now, thanks to INIM’s perception of installer company needs, that system is available.

The first-rate “Air2” wireless system operates over 868MHz band and moreover uses two-way signal transmission technology. This means that all the system devices transmit and receive signals. This two-way transmission technology also means that the traditional receiver has been replaced by a superior device that not only receives but also transmits signals to all the system devices.

Therefore, the “Air2” system does not rely on one-way alarm signal transmission, like most wireless systems, but verifies the successful effect of the signal on the target device via a two-way wireless transmission channel. Security professionals will find the innovative operating principles and superior functions of the “Air2” wireless system more than convincing and will surely appreciate the advanced features of the system diagnostics.

The transceiver connects directly to the control panel I-BUS (INIM’s peripheral communication bus) and allows fully-integrated management of all wireless and hard-wired devices. INIM’s “Air2” high-performance wireless system provides complete protection and in no way lowers security. Choosing “Air2” means reducing installation time to a minimum whilst at the same providing those hard-to-get-to spots with total protection. The “Air2” wireless system can be installed without defacing the structure it protects, and therefore finds its niche in buildings of importance such as churches and museums where extensive structural work would spoil the overall appearance of the building.

Main features of the Air2-MC200/S

Communication with Air2-BS200 transceiver

Two-way

Protections

Dislodgement and open cover

Magnetic contacts

1

Tilt and Shock sensor

1

Shock sensor sensitivity

10 programmable levels

Tilt sensor sensitivity

10 programmable levels, from 4° to 70°

Tilt delay signal

Programmable from 100ms to 2 minutes

Colours

White, Brown, Black

Battery

CR2

Battery life

4 years

Tamper input

1

Dimensions (HxWxD)

58x35x23 mm

Magnet dimensions (HxWxD)

13x40x14 mm

Total weight

30 g

Technical features of the system

Operating frequency

868MHz

Communication type

Two-way

Modulation

GFSK

Channel

3

Air2-MC200/SB: wireless magnetic contact with integrated tilt and shock sensor. Colour White.

Air2-MC200/SM: wireless magnetic contact with integrated tilt and shock sensor. Colour Brown.

Air2-MC200/SN: wireless magnetic contact with integrated tilt and shock sensor. Colour Black.

Related products

Air2-BS200

Air2-KF Pebble

Air2-UT100/S

Air2-KF Ergo