Programming of the IFMLAN Ethernet communicator module

[A]	Buttons to access the programming subsections
[B]	Serial number of the module
[C]	Module settings
[D]	Settings specific for protocols

The section that opens immediately giving access to the programming of communication over Ethernet, of the module itself and of the various protocols in use.

The top button bar [A] allows access to the programming of other functions relating to Ethernet communication:

Module settings		Section for the programming of the IFMLAN module [C].
Contacts		Section for the programming of the address book with recipients of communications via e-mail, SIA-IP and ESPA 4.4.4
Actions		Section for the programming of the actions that refer to the communicator module (sending of e-mails, sending of SIA-IP and ESPA 4.4.4 communications)
ONVIF Camera		Section for defining the IP cameras with ONVIF protocol for use by the control panel
BACnet		Section for the programming of the BACnet points
EVAC		Section for the programming of voice evacuation systems
Graphic maps		Section for the programming of graphic maps accessible from Web-server
Cloud		Section for the programming of the Inim Cloud service